The Makeblock mCreate printer is a 3D FDM printer equipped with 2 3D heads + laser. It can print any 3D part in PLA, Flexible, Semi-flexible and Multi-material PLA with generic 1.75 mm diameter filaments. Open source, the printing software offers the possibility of a complete parameterization of the mCreate 3D printer (temperature, filling rate, ...) allowing to print all precise technical parts of small and large format with or without supports, with a maximum volume of 200x220x295 mm and a definition going from 0.05 to 0.30 mm. (Thickness of the layers making the printing +/- smooth and aesthetic).
The Makeblock mCreate printer is a 3D FDM printer equipped with 2 3D heads + laser. It can print any 3D part in PLA, Flexible, Semi-flexible and Multi-material PLA with generic 1.75 mm diameter filaments. Open source, the printing software offers the possibility of a complete parameterization of the mCreate 3D printer (temperature, filling rate, ...) allowing to print all precise technical parts of small and large format with or without supports, with a maximum volume of 200x220x295 mm and a definition going from 0.05 to 0.30 mm. (Thickness of the layers making the printing +/- smooth and aesthetic).
Delivered as a plug and play block, the change from 3D to Laser will take less than 30 seconds! With a power of 500 mW it will allow you to engrave on flat or curved surfaces such as paper, wood, cardboard, acrylic ...
With the "Laserbox for mCreate" software, you can process images, configure the engraving area and parameters, plan the optimal engraving path for each project.
A large build volume allows mCreate to engrave on curved surfaces of solid objects of a certain height. Full case hardening with pause when the door is opened.